FPG 411 / FPG 412 Configuration
- Press the Home button.
- Go to
and press to select all the menus. - Go to Settings > Communication.
- Select RS-485 RTU Port or Ethernet Port.
- Set the communication parameters.
- RS-485 RTU Port
| Parameter | Setting |
| Protocol settings | Modbus Slave |
| Slave address | The controller address in the network |
| Channel settings | Baud - 9600 Parity - None |
- Ethernet Port
| Parameter | Setting |
| Protocol | Modbus Slave |
| Channel settings | IP address - 10.10.10.10 Subnet mask - 255.0.0.0 Port - 502 |