PS 220 Configuration

The user can choose between TCP or RTU Modbus communication

Modbus TCP

The FMBT-21 device must be installed in slot 2.

Set the following parameters.

Parameter	Parameter name	Setting
50.1	FBA A ENABLE	[2] Option slot 2
74.01	START/STOP	[6] Fieldbus
74.05	SPEED OVERRIDE	[6] Fieldbus
74.06	SPD OVERRIDE	[3] Fieldbus
51.01	FBA A type	[128] Ethernet
51.02	Protocol/Profile	[1] MB/TCP ABB E
51.03	Commrate	[0] Auto
51.04	IP configuration	[0] Static IP
51.05	IP address 1	10
51.06	IP address 2	10
51.07	IP address 3	10
51.08	IP address 4	20
51.09	Subnet CIDR	24
51.22	Word order	1 = HILO
51.23	Address mode	[1] Mode 1
51.27	FBA A par refresh	[1] Refresh

 

Modbus RTU

The FSCA-module must be installed in slot 2.

Set the following parameters.

50.1	FBA A ENABLE	[2] Option slot 2
74.01	START/STOP	[6] Fieldbus
74.05	SPEED OVERRIDE	[6] Fieldbus
74.06	SPD OVERRIDE REF	[3] Fieldbus
51.01	FBA A type	[485] FSCA
51.02	Protocol/Profile	[1] MB/TCP ABB E
51.03	Station ID	1
51.04	Baud	9600
51.05	Parity	None
51.25	Protocol	[1] Modbus
51.27	FBA A par refresh	[1] Refresh