FPG 411 / FPG 412 Configuration

1. Press the Home button.
2. Go to  and press to select all the menus.
3. Go to Settings > Communication.
4. Select RS-485 RTU Port or Ethernet Port.
5. Set the communication parameters.

• RS-485 RTU Port

Parameter	Setting
Protocol settings	Modbus Slave
Slave address	The controller address in the network
Channel settings	Baud - 9600 Parity - None

 

• Ethernet Port

Parameter	Setting
Protocol	Modbus Slave
Channel settings	IP address - 10.10.10.10 Subnet mask - 255.0.0.0 Port - 502