Hydrovar HVL-configuratie
Op het Hydrovar HVL-apparaat moet de toets omhoog en omlaag worden ingedrukt om de submenu's te wijzigen.
- Ga naar M1200 RS-485 INTERFACE.
- Stel de volgende parameters in.
| ID | Parameter | Instelling |
| P24 | Apparaat inschakelen | Ingeschakeld |
| P105 | Modus | Controller of Cascade |
| P202 | Software | V2.0 of hoger |
| P210 | Omvormer | Alles |
| P1203 | Protocol | Modbus RTU |
| P1205 | Adres | 1 |
| P1210 | Baud-snelheid | 9600 |
| P1215 | Opmaak | 8,N.1 |
| P1310 | Pompadres | 1 |
| P1321 | Automatisch starten | AAN |
| P1323 | Adres | 1 |