Sensus FlexNet® communication network more accurately pinpoints outages for faster recovery than mesh networks.

Sensus FlexNet® communication network transmits data with more powerful range than mesh networks for the highest throughput—and no hops.

The gas-driven Flojet G56 BeerJet pump delivers exceptional, waste-free pours from the top to the bottom of the barrel.

From pioneering the first submersible dewatering pump in 1901 to launching the intelligent Flygt Concertor® and next-gen Flygt Bibo, Flygt continues to drive smart, sustainable water solutions for the world’s toughest challenges.

Xylem introduces Concertor, a fully integrated system with high operational flexibility that takes wastewater pumping to a whole new level.

How do I get my Rule-Mate pump out of safe mode and back into regular mode? Here we explain why your Rule-Mate pump may be in safe mode and how cleaning the pump will get it back into regular mode.

Learn how to set up a project with the SonTek HydroSurveyor-M9 and HYPACK in this 10-part series by Senior Hydrologist Daniel Wagenaar.

SonTek’s Janice Landsfeld highlights key instruments for measuring open channel flow in small to mid-sized rivers based on site needs.

The best way to figure out which Jabsco electric marine toilet model you have is simply by looking at the switch that activates the flush. This video shows the switch and the corresponding model number for our more popular marine toilets, including the Jabsco Electric marine toilets, the Jabsco Quiet Flush marine toilets, and the Jabsco Deluxe Flush marine toilets.

Here we explain how to seal the manual override wire (the brown and white striped one) on our Rule Automatic Bilge Pumps and Rule-Mate bilge pumps if you're unable to use it. It's important to properly seal the end of the wire so that water won't damage the pump. We'll show you one way to close off the end of the wire with silicone caulking, heat shrink tubing, and a heat gun.

Does your Jabsco Twist 'n' Lock manual toilet squeak when you push the handle down? We're going to show you how to quickly fix the issue with some silicone grease and a wrench.

Step-by-step instructions on how to swap out your Jabsco Twist 'n' Lock manual pump assembly using the 29040-3000 kit. Be sure you have gloves and paper towels, as well as a Phillips head and flathead screwdriver.

Hydrographers in Australia and New Zealand train on using HYPACK for hydrographic surveys with SonTek’s HydroSurveyor and RiverSurveyor-M9 systems.

Sensus offers several solutions to help utilities address the real and apparent losses within non-revenue water.

What's inside Jabsco Y-valve? This video shows you how to take apart the valve, what's inside, and reviews the service kit (45488-0000) that's available. If yours has been used and you want to take it apart, don't forget to take protective measures against the biohazards involved with a marine sanitation system.

Take a look inside of a Rule float switch and why it makes that clicking noise.

A flexible solution for emergency and mobile drinking water contaminant mitigation.

Xylem's expert explains how to install a gasketed filter cloth for your filter press.

Having battery issues with your RiverSurveyor-M9 or CastAway-CTD? Dr. Xue Fan explains available power options and what to consider when choosing the right one.

Learn how GPS positioning enhances RiverSurveyor stationary live measurements, improving accuracy and efficiency in water depth and velocity profiling for discharge calculations.

Chemical-free, cost-effective and reliable high purity water