Flygt Concertor Flygt Concertor N

Specifications

Pump	Concertor N 6020	Concertor N 6030
Motor	Synchronous (concentrated winding); Permanent magnet rotor	Synchronous (concentrated winding); Permanent magnet rotor
Motor efficiency	IE4 efficiency according to IEC/TS 60034-30-2 Ed. 1	IE4 efficiency according to IEC/TS 60034-30-2 Ed. 1
Frequency	50, 60 Hz	50, 60 Hz
Voltage / Rated Power	200-240 V / 3.0, 5.5, 7.5 HP (2.2, 4.0, 5.5 kW); 380-480 V / 3.0, 5.5, 7.5, 10.0 HP (2.2, 4.0, 5.5, 7.3 kW)	400-480 V / 11, 14, 18 HP (8.2, 10.6, 13.4 kW)
Rated ambient liquid temperature	104° F (40° C)	104° F (40° C)
Hydraulic	Guide pin; Adaptive N	Guide pin; Adaptive N
Discharge sizes	3", 4", 6" (80, 100, 150 mm)	3", 4", 6", 8" (80, 100, 150, 200 mm)
Speed range	200-240 V: 500-3000 rpm; 380-480 V: 500-3600 rpm	800-3000 rpm
Impeller material options	Hard-Iron; Duplex stainless steel	Hard-Iron; Duplex stainless steel
Seal system	Plug-in seal with double mechanical seals; Active Seal system	Plug-in seal with double mechanical seals; Active Seal system
Seal material options	WCCR/WCCR; RSiC/WCCR	WCCR/WCCR; RSiC/WCCR
Cooling system	Liquid-free heat-conduction technology	Closed loop cooling
Installation	Portable wet well installation (P); Portable free-standing installation (S); Vertically mounted, permanent dry well installation (T); or Horizontally mounted, permanent dry well installation (Z)	Portable wet well installation (P); Portable free-standing installation (S); Vertically mounted, permanent dry well installation (T); or Horizontally mounted, permanent dry well installation (Z)
Sensors	Leakage detection in stator housing; Two independent temperature sensors	Leakage detection in inspection chamber; Two independent temperature sensors
Cable	Screened Flygt SUBCAB®, with integrated control wires – 30, 50, 60, 100 ft (10, 16, 20, 31 m)	Screened Flygt SUBCAB®, with integrated control wires – 30, 50, 60, 100 ft (10, 16, 20, 31 m)
Approvals	CE, FM, ATEX, IECEx, CSA, UKCA, UKEX	CE, CSA, UKCA