FPG 413 / FPG 414 / FPG 415 Configuration
Use the FOP 315 or FOP 402 HMI to configure the FPG 413, FPG 414, or FPG 415 device.
- Go to Settings > Communication.
- Select Modbus RTU or Modbus TCP.
- Set the communication parameters.
| Parameter | Setting |
| Default gateway | The settings for communication over Ethernet. |
| IP Address | 10.10.10.10 |
| Subnet mask | 255.0.0.0 |
| Slave address | The Modbus address in the network. |
| Baud | 9600 |
| Stop bits | 1 |
| Parity | None |
| Port | 502 |